AFGS-87219 Electrical Power Systems, AircraftThis specification establishes the performance requirements and verifications for electric power subsystems EPS for aerospace vehicles, including aircraft, helicopters, and missiles.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70

AFGS�87219B

4.5 Maintainability.

Compliance with the maintainability requirements of 3.5 shall be verified by analyses and demonstrations as follows: ------------.

4.6 System safety.

Compliance with the system safety requirements of 3.6 shall be verified by analyses and tests as follows: ------------.

4.7 Interface requirements.

Compliance with the EPS interface requirements of 3.7 shall be verified as follows:

------------.

4.8 Supportability.

4.8.1 Integrated diagnostics and testability verification.

In-process verification that the EPS satisfies the diagnostics and testability requirements and constraints shall be accomplished by ------------. Final verification shall be accomplished by

------------.

4.8.1.1 Verification of fault detection/isolation.

In-process verification that the EPS, its subsystems and equipment satisfy the fault detection/isolation requirements shall be accomplished by ------------. Final verification shall be accomplished by ------------.

4.8.2 Packaging, handling, storage, and transportation.

The PHST requirements shall be verified by ------------.

4.8.3 Tools verification.

In-process verification of tool requirement and selection shall be accomplished by review of

the tool lists, drawings, and justifications for modified and special tools. Final verification of the adequacy and completeness of tools shall be accomplished by ------------.

5. PACKAGING

5.1 Packaging.

For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or within the military service's system commands. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD-ROM product, or by contacting the responsible packaging activity.